Diagnosis · Repair · Replacement
Wine Cellar Cooling Repair & Replacement

Service call, credited toward a replacement unit
Authorized dealer: WhisperKOOL, Wine Guardian, CellarPro, LRC
The target every replacement is sized to hold
Typical cooling system life, longest when serviced
What’s Included
Every call starts with finding out why the cellar isn't holding temperature. Sometimes it's the unit; often it's the room around it. We fix the cause, not just the symptom, and when a unit has reached the end of its life we size, supply and install the replacement.
On-Site Diagnosis
A technician checks temperature, humidity, refrigerant pressures, airflow, drainage and controls, then tells you what failed and why.
Repairs on Major Brands
We repair WhisperKOOL, Wine Guardian, CellarPro, LRC Coil, Breezaire and CellarCool units, from failed fans and sensors to refrigerant leaks and iced coils.
Heat-Load Check & Sizing
Before replacing anything, we recalculate the cellar's heat load from its size, glass, insulation and surroundings, so the new unit is neither undersized nor oversized.
Replacement Units, Supplied Direct
As an authorized WhisperKOOL, Wine Guardian, CellarPro and LRC dealer, we supply the right replacement unit ourselves instead of sending you shopping.
Licensed Installation & Start-Up
Refrigeration work is carried out by technicians who are Texas licensed and insured in accordance with all local and state laws, and every system is started up and tested.
Clear Findings & Options
You get a written summary of what we found, with repair and replacement options side by side, before any work goes ahead.
Prestige Care
Every Prestige Care plan includes two full service visits a year and a written condition report, so a repaired or new cooling unit reaches the long end of its working life. Higher plans add priority response, 24/7 monitoring and larger parts discounts.
Essential
Two service visits a year
$1,500/yr
Signature
Adds 48-hour priority response
$2,500/yr
Black
Adds 24/7 monitoring and same-day dispatch
$4,500/yr
How It Works
Most failing systems give some warning: a cellar creeping above 60°F, a unit that never cycles off, water where it shouldn't be, ice on the coil. The sooner we see it, the more likely it's a repair rather than a replacement.
1
Book a Service Call
Call +1 737-379-1270 or request service online. The $500 service call puts a Prestige technician on site, and Prestige Care members are seen first.
2
Diagnose the System
We test the unit and its controls, then the room itself: door seals, vapor barrier, glass and anything else adding heat or moisture.
3
Repair or Replace
We explain what failed and lay out the options. If a repair makes sense, we make it. If the unit is at the end of its life, the $500 service call is credited toward the new one.
4
Size the Replacement
A replacement is sized to the cellar, not matched to the old model number. We recalculate the heat load and recommend the right system type: self-contained, ducted, split or ceiling-mounted.
5
Install & Start Up
Licensed technicians install the unit, run the line set or ductwork where it's needed, start the system and confirm it holds 55°F at 50–70% humidity.
6
Keep It Running
A Prestige Care plan adds two service visits a year, catching small problems before they reach the collection.
Repair or Replace
A cooling unit is mechanical, and most wine cellar cooling systems last somewhere between 8 and 15 years. Where yours lands depends on how hard it has worked and how well it has been looked after. A unit that is relatively young, correctly sized and has a single failed part is almost always worth repairing.
Replacement starts to make sense when the unit is near the end of that range, when repairs are stacking up, or when it was the wrong size to begin with. An undersized unit runs constantly and never catches up in a Texas summer. An oversized one cools the air quickly and shuts off before it has pulled moisture out of the room, so it short-cycles, wears out early and lets humidity swing.
That is why we never replace a unit by matching the old model number. We recalculate the heat load first: the cellar's volume, how much of it is glass, the insulation and vapor barrier, and the temperature of the space around it. Sometimes the right answer is a different type of system, such as moving from a through-wall unit to a ducted or split system that takes the noise and the heat out of the room. You can get a first estimate with our wine cellar heat-load calculator.
And sometimes the unit was never the problem. A missing vapor barrier, a leaking door seal or a large pane of single glass can overwhelm any cooling system. We look for that during diagnosis, so you don't buy a new unit to fight the same room.
Expert Guides

Guide
Wine Cellar Cooling Systems: Split vs Ducted
Split, ducted or self-contained? How to choose a wine cellar cooling system: sizing, installation, features and maintenance.
Read the guide →

Guide
Wine Cellar Cooling Units: The Heart of Wine Preservation
Discover how cellar cooling units protect your wine investment. Expert guidance on choosing, installing, and maintaining climate control systems.
Read the guide →

Guide
Wine Guardian Systems: Are They For You?
Discover why Wine Guardian cooling systems are trusted by luxury wine cellars worldwide. Expert insights on technology, installation, and performance.
Read the guide →
FAQ
How much does a wine cellar cooling service call cost?
The service call is $500. It puts a technician on site to diagnose the cooling system, and if the unit needs replacing, the $500 is credited toward the new unit.
Should I repair or replace my wine cellar cooling unit?
Repair a unit that is relatively young, correctly sized and has a single failed part. Consider replacing it when it is near the end of its typical 8–15 year life, when repairs keep coming, or when it was sized wrong for the room. We size every replacement with a fresh heat-load calculation.
Why is my wine cellar not cooling?
The most common causes are a failing or undersized cooling unit, a missing or damaged vapor barrier, leaking door seals and large areas of glass. A service call finds out which one it is, so you fix the cause instead of the symptom.
Which wine cellar cooling brands do you repair and replace?
We repair WhisperKOOL, Wine Guardian, CellarPro, LRC Coil, Breezaire and CellarCool units. We're an authorized dealer for WhisperKOOL, Wine Guardian, CellarPro and LRC, so diagnosis, parts and replacement units come from one team.
Do you repair cooling in wine cellars you didn't build?
Yes. We service and replace cooling systems in residential and commercial wine cellars in our service area, whoever built them.
Who carries out the refrigeration work?
Our refrigeration technicians are Texas licensed and insured in accordance with all local and state laws.
Where do you offer wine cellar cooling repair?
We repair and replace wine cellar cooling systems in Austin and central Texas, the Fort Worth area and San Antonio. Elsewhere in Texas, call +1 737-379-1270 and we'll tell you whether we can reach you.
Request a service call, or call +1 737-379-1270 if your system is down now. The $500 service call is credited toward a replacement unit if you need one.
Explore Other Services
Browse Service Areas
To see all of our Texas markets, visit our Texas Service Areas page.
Serving Austin, Dallas–Fort Worth, Houston & San Antonio
REQUEST A CONSULTATION
Start with a phone consultation
Share a few details and our design team will call you within 24 hours.
Request a Consultation
Tell us how to reach you.









