Limited Edition of 10

The Lantern

Oak, brass and mirror. Four and a half feet wide.

Kit from

$55,000

Capacity

151–285

Width

53–96″

Height

108″

Depth

26″

Configure yours

Configure yours

The Reveal

Brass, wrapped around glass.

A slim polished brass reveal runs the full perimeter of the opening, and the frameless glass doors seat straight into it. The brass is the only thing between the room and the wine.

The Field

Ninety bottles, label forward.

Two oak panels carry a full field of blackened steel pins, three deep, every bottle turned to face you. Left deliberately part-filled, the pins read as pattern across the grain — the rack is the ornament.

The Mirror

It doubles everything behind it.

The centre bay is mirrored, with floating oak shelves crossing it. The mirror takes four and a half feet of cabinet and gives back the impression of twice that, and every lamp inside is reflected once more.

The Base

Cases, lit from within.

Beneath the mirror, an illuminated panel behind slim brass slats. Below that, original timber cases sit on a lit deck — the format wine actually arrives in, treated as something worth showing.

FINISH

The Lantern

Five ways, or yours

Millwork and metal move together — channel, pulls, fittings and pins all change with the wood. The black finishes are stained white oak, so the grain still shows. Tap a finish, then tune the glass and the light.

White Oak & Brass

Ebonized Oak & Brass

All Black

Walnut & Bronze

Fumed Oak & Steel

+

Custom

Prestige Wine Cellars limited edition wine cellar
Prestige Wine Cellars limited edition wine cellar

Selected finish

As designed

Light

Custom finish

Every material opens up — wood (white oak, walnut or sapele mahogany), stain, metal, glass and stone chosen with us rather than from a list. Available on any Limited Edition, priced above the authored finishes. Still numbered.

Limited Edition of Ten

Reserve your Limited Edition.

Three decisions: how deep it runs, which specification, and how you’d like it delivered. Cooling, structural load and engineering are ours — they’re never a question you have to answer.

Step 1
Capacity
Pick the size. The design, proportions and details stay exactly as drawn — only the bottle count changes.
Single bay
151
Bottles · 53″ wide
As drawn
Wide bay
210
Bottles · 72″ wide
+$9,500
Double bay
285
Bottles · 96″ wide
+$18,500

The Lantern scales sideways, not deeper. The pin field, the mirrored centre and the lit base all hold their proportion — the bays simply widen, and above 72″ a second pair of doors is added. Roughly 53–96″ wide × 108″ tall × 26″ deep, drawn to your verified opening.

Step 2
Specification
Every Limited Edition Wine Cellar Kit is built to one specification. The joinery and glass below are part of every kit.
The Lantern
• Hand-finished white oak, deepened tone • Blackened steel pin field • Solid polished brass reveal, patch fittings and pulls, on low-iron glass
Included
Centre bay
Mirrored — the centre doubles the room and every light inside it.
Climate system
Through-wall · sized to this configuration
Specified by us
Included in price
Step 3
How we deliver it
From drawings alone to full turnkey. Cooling and engineering are included at every level — never a question you answer.
Design Plans
A complete architectural drawing set — plan, elevations and sections dimensioned to your verified opening, structural loads, a full material schedule with part numbers, and the cooling specification. Everything your contractor needs to build it. Materials not supplied.
from $9,750
Design + Materials
Everything supplied and crated — posts, racking, glass, lighting, hardware. All taxes and white-glove delivery included.
from $55,000
Most chosen
Design + Build (Texas)
Complete. Delivered, installed, and maintained — one price.
from $83,000
Custom
Every material opens up — wood (white oak, walnut or sapele mahogany), stain, metal, glass and stone chosen with us rather than from a list. Still numbered, still part of the Limited Edition.
Quoted — above Limited Edition pricing
The Lantern · 151 bottles · Design Plans$9,750
Reserve your Limited Edition

Have this configuration sent to you

We'll email the specification exactly as you've built it. No obligation, no drawings released.

Pricing shown is indicative. Final price is confirmed after field verification of your opening.

What Design Plans includes

Full architectural drawings dimensioned to your verified opening — plan, elevations, sections and details — plus structural load calculations, a complete material schedule listing every component, finish and quantity, and the cooling specification sized for your configuration. A licensed set, not a sketch.

Materials are not supplied at this level. Our racking, glass and cooling partners sell through authorised dealers only, so if you’d like us to supply and crate the components, choose Design + Materials.

Credited if you upgrade. The full plans fee is credited toward Design + Materials or Design + Build if you move up within twelve months.

Licensed for one build at one address. Not transferable and not for resale.

Provenance

Drawn, then built.

The Lantern began as shop drawing BJC-006, Revision 0 — 151 bottles, 108″ tall, 26″ deep. Every dimension on this page comes from that sheet, not from a mood board. It was engineered before it was ever offered: structural loads calculated, components specified, cooling sized. What you receive is that engineering, drawn to your opening.

151

Bottles, counted four ways

90 on the pin field, 25 upright on the shelves, 24 in case storage, 12 on angled display.

12′

Floor to ceiling

Drawn as a full-height piece, not a cabinet with glass on top. The proportion is the design.

26″

Depth

Twenty-six inches of wall, with the rack assembly itself running shallower still.

How It Works

Designed by us. Installed by yours (Or Us!).

Every Limited Edition ships as a complete, engineered kit — crated, numbered, and ready for your contractor.

01

Reserve your Limited Edition

Choose your size, specification and delivery. We assign your edition number and open the drawing, engineered to your verified opening.

02

Field verification

Your contractor then submits verified opening dimensions before anything goes into production.

03

Fabrication

Posts, racking, glass, lighting and hardware are fabricated to your verified measurements — in parallel, with the longest-lead component setting the schedule.

04

Crated delivery

Everything arrives palletized and labeled by install sequence, with a printed guide and video for each assembly.

05

Your contractor installs

Posts anchor floor to ceiling, the base sets like millwork, and the glass drops into the channel. We’re on call throughout.

Box & Papers

Owned by ten. Documented like it.

A fine watch is worth more with its box and papers. Your cellar arrives the same way.

Prestige Wine Cellars limited edition wine cellar

The Ownership Card

Black anodised · No. 01 of 10

The ownership card.

Black anodized metal, laser-etched with the model, specification and edition number. It lives with the deed — not in a drawer.

The etched code opens your cellar’s private record: original drawings, material schedule, appraisal, and complete service history.

Scan → prestigecellars.com/registry/lantern-01

01 / 04

The portfolio

A linen-bound folio holding the certificate of authenticity, signed and dated to your edition number.

02 / 04

As-built drawings

Your full shop drawings and material schedule — every finish, fitting and post spec, as installed.

03 / 04

Appraisal letter

A written valuation for insurance today, and for the listing when the home eventually sells.

04 / 04

Brass plaque

Engraved “The Lantern Black · No. __ of 10,” set into the piece itself.

Technical Specifications

Held to a Standard.

Limited Edition

10 total

›

Capacity

151 – 285 bottles

›

Dimensions

53–96″ W × 108″ H × 26″ D

›

Display

Pin field · three deep

›

Base cabinet

37⅜" with stone counter

›

Lighting

Concealed behind post

›

Glass

Frameless · brass-set

›

Lead time

8–12 weeks · by configuration

›

Questions

Answered.

Who installs it?

Your own contractor. Every Limited Edition is engineered as a complete wine cellar kit — components arrive crated, numbered and drawn to your verified opening, with an installation set a competent carpenter can work from. No specialty glazier, no factory crew flown across the country. In Texas we install it ourselves if you’d rather.

Will it fit my space?

Almost certainly, and it won’t need to be a standard size.

The Lantern is drawn to your verified opening rather than to a catalogue dimension.

It scales across 53–96″ W × 108″ H × 26″ D, and the proportions hold at any size in that range.

What happens if a measurement is wrong?

The sequence is built to prevent it. The channel and framing ship first and are installed before anything is cut. Your contractor then returns signed, verified opening dimensions, and only then is the glass cut and the racking finalised. Nothing expensive is fabricated against a number nobody has checked.

What’s included, and what isn’t?

Included: the architectural drawing set, all racking and display components, glass, lighting, hardware, the cooling unit sized for your configuration, and crated delivery. Not included: the wall or enclosure itself, electrical supply, and finish work by others. The drawing set states exactly which trades you need and what each is responsible for.

How long does it take?

It varies with the design — components are fabricated in parallel, and the longest one sets the schedule. Millwork runs eight to twelve weeks; metalwork two to four; frameless glass and mirrors about two; the cooling unit about two. Insulated glass doors are the long lead at twelve to sixteen weeks. Your drawing set states the schedule for your exact configuration before anything is fabricated.

What happens if the cooling fails?

Cooling is the one part that fails invisibly — you don’t find out until the wine does. Every Limited Edition is sized and specified by us rather than chosen from a list, and Prestige Care covers it from there. If a unit needs a technician the $500 service call is credited toward a replacement.

Is it really only ten?

Yes. Ten of each design, each numbered and recorded in the registry, and then the Limited Edition closes for good. The drawings aren’t reissued and the design isn’t rerun under another name.

Can I change the materials?

Yes — that’s Custom, available on any Limited Edition. Wood (white oak, walnut or sapele mahogany), stain, metal finish, glass and stone are chosen with us rather than from a list, and layout or proportions can change too. Still numbered, still part of the Limited Edition, and priced above the authored finishes.

REQUEST A CONSULTATION

Start with a phone consultation

Share a few details and our design team will call you within 24 hours.

Step 1 of 2

Request a Consultation

Tell us how to reach you.