Limited Edition of 10

The Colonnade

About 325 bottles, every label facing the room.

Starting at

$15,000

Engineered before it is offered. Every edition ships with a full architectural drawing set.

Shown as rendered in the studio concept. Starting price reflects the base Signature configuration; the edition is drawn to your room on commission.

Capacity

325

Width

To your room

Height

Floor to ceiling

Depth

Walk-in

The fins

A colonnade in oak

Oak fins stand at a steady rhythm around the room, each lit along its face and pinned to the soffit on a brass standoff, so the whole run looks as if it stands on its own. Between them, paired brass rods carry the bottles one to a level, every label facing you.

The tray

Where the rows pause

Halfway up every bay a sloped oak tray turns a few bottles label-up, and the band runs unbroken down both side walls. It is where the current favourites go, and it gives a wall of rows somewhere to rest.

The marble

Lit stone, and a table

White veined marble lines every bay on three walls and glows from behind. The same stone tops a freestanding white-oak island with drawers and cubbies for full cases, so the room has somewhere to open a bottle and somewhere to keep the case it came in.

The room

Bright, all the way in

Pale oak, pale stone, and a black steel front with French doors at the centre. Most walk-ins are dark rooms you visit; this one reads as part of the house, lit like the hall outside it.

FINISH

The Colonnade

Four ways

Tap a finish to sweep it across the room. As shown is included; the alternates change the timber and metal and leave the design untouched. The edition is ten across every finish, so a finish no one else chooses can be yours alone.

As Shown

Walnut & Brass

Fumed Oak & Steel

All Black

+

Custom

Prestige Wine Cellars limited edition wine cellar
Prestige Wine Cellars limited edition wine cellar

Selected finish

As designed

Glass

Light

Custom finish

Every material opens up — species, stain, metal, glass and stone chosen with us rather than from a list. Available on any edition, priced above the authored finishes. Still numbered.

Edition of Ten

Reserve your edition.

Three decisions: how deep it runs, which specification, and how you’d like it delivered. Cooling, structural load and engineering are ours — they’re never a question you have to answer.

Step 1
Capacity
Pick the size. The design, proportions and details stay exactly as drawn — only the bottle count changes.
As shown
325
Bottles · Three walls and an island
As drawn

The Colonnade is shown at about 325 bottles. It is drawn to your room on commission rather than sold in sizes: the fin rhythm, the tray band and the island hold their proportion, and capacity follows the room. Counts are confirmed at specification.

Step 2
Specification
Signature is the piece as drawn. Black upgrades the materials and the glass — nothing else changes.
The Colonnade Signature
• Precision-milled white-oak fins on a proven rod system • Standard clear tempered safety glass • Integrated LED along every fin, backlit marble behind every bay
Included
The Colonnade Black
• Heirloom-grade joinery, hand-applied finish, made in the USA • Starphire low-iron glass — no green edge cast • Integrated LED along every fin, backlit marble behind every bay
+$50,000
Marble
By others — your fabricator supplies the backlit marble panels and the island top to our drawing.
Climate system
Ducted split · sized to this configuration
Specified by us
Included in price
Step 3
How we deliver it
From drawings alone to full turnkey. Cooling and engineering are included at every level — never a question you answer.
Design Plans
A complete architectural drawing set — plan, elevations and sections dimensioned to your verified opening, structural loads, a full material schedule with part numbers, and the cooling specification. Everything your contractor needs to build it. Materials not supplied.
from $21,000
Design + Materials
Everything supplied and crated — posts, racking, glass, lighting, hardware. All taxes and white-glove delivery included.
from $120,000
Most chosen
Design + Build (Texas)
Complete. Delivered, installed, and maintained — one price.
from $180,000
Design + Build (Other states)
Complete. Delivered, installed, and maintained — one price.
from $207,000
Custom
Every material opens up — species, stain, metal, glass and stone chosen with us rather than from a list. Still numbered, still part of the edition.
Quoted — above edition pricing
The Colonnade Signature · 325 bottles · Design Plans$21,000
Reserve your edition

Have this configuration sent to you

We'll email the specification exactly as you've built it. No obligation, no drawings released.

Pricing shown is indicative. Final price is confirmed after field verification of your opening.

What Design Plans includes

Full architectural drawings dimensioned to your verified opening — plan, elevations, sections and details — plus structural load calculations, a complete material schedule listing every component, finish and quantity, and the cooling specification sized for your configuration. A licensed set, not a sketch.

Materials are not supplied at this level. Our racking, glass and cooling partners sell through authorised dealers only, so if you’d like us to supply and crate the components, choose Design + Materials.

Credited if you upgrade. The full plans fee is credited toward Design + Materials or Design + Build if you move up within twelve months.

Licensed for one build at one address. Not transferable and not for resale.

Provenance

Drawn, then built.

The Colonnade is a concept from the Prestige studio: a bright walk-in of pale white oak and backlit white marble, seen through a full-width black steel front. Oak fins stand in a colonnade around three walls, each one stopping short of the soffit on a brass standoff so the run reads as floating, and about 325 bottles lie between them on paired brass rods with every label turned to the room.

It has not been drawn for anyone yet. The Colonnade is drawn on commission, to your room: the fin rhythm, the display band and the island hold their proportion, and the rest follows your walls.

325

Bottles, label-forward

Shown across three walls, an angled tray band and an island of case cubbies. Counted again at specification.

Brass

Every fin floats

Each oak fin stops short of the soffit on a brass standoff, so the colonnade stands clear of the ceiling.

1

Pale walk-in

The only bright, pale walk-in among the editions: white oak and white marble, with the black steel kept to the front.

How It Works

Designed by us. Installed by yours (Or Us!).

Every edition ships as a complete, engineered kit — crated, numbered, and ready for your contractor.

01

Reserve your edition

Choose your size, specification and delivery. We assign your edition number and open the drawing, engineered to your verified opening.

02

Field verification

Your contractor then submits verified opening dimensions before anything goes into production.

03

Fabrication

Posts, racking, glass, lighting and hardware are fabricated to your verified measurements — in parallel, with the longest-lead component setting the schedule.

04

Crated delivery

Everything arrives palletized and labeled by install sequence, with a printed guide and video for each assembly.

05

Your contractor installs

Posts anchor floor to ceiling, the base sets like millwork, and the glass drops into the channel. We’re on call throughout.

Box & Papers

Owned by ten. Documented like it.

A fine watch is worth more with its box and papers. Your cellar arrives the same way.

The Ownership Card

Black anodised · No. 01 of 10

The ownership card.

Black anodized metal, laser-etched with the model, specification and edition number. It lives with the deed — not in a drawer.

The etched code opens your cellar’s private record: original drawings, material schedule, appraisal, and complete service history.

Scan → prestigecellars.com/registry/colonnade-01

01 / 04

The portfolio

A linen-bound folio holding the certificate of authenticity, signed and dated to your edition number.

02 / 04

As-built drawings

Your full shop drawings and material schedule — every finish, fitting and post spec, as installed.

03 / 04

Appraisal letter

A written valuation for insurance today, and for the listing when the home eventually sells.

04 / 04

Brass plaque

Engraved “The Colonnade · No. __ of 10,” set into the piece itself.

Technical Specifications

Held to a Standard.

Edition

Limited — 10 total

›

Capacity

about 325 bottles · as shown

›

Dimensions

Drawn to your room

›

The fins

Floating oak · brass rods

›

The tray band

Angled · mid-height

›

The marble

Backlit · three walls

›

Glass

Black steel-framed · French doors

›

Lead time

Drawn on commission · then 8–12 weeks

›

Questions

Answered.

Who installs it?

Your own contractor. Every edition is engineered as a complete wine cellar kit — components arrive crated, numbered and drawn to your verified opening, with an installation set a competent carpenter can work from. No specialty glazier, no factory crew flown across the country. In Texas we install it ourselves if you’d rather.

Will it fit my space?

Almost certainly, and it won’t need to be a standard size.

The Colonnade is drawn to your verified opening rather than to a catalogue dimension.

It scales across Drawn to your room · floor-to-ceiling racking on three walls, and the proportions hold at any size in that range.

What happens if a measurement is wrong?

The sequence is built to prevent it. The channel and framing ship first and are installed before anything is cut. Your contractor then returns signed, verified opening dimensions, and only then is the glass cut and the racking finalised. Nothing expensive is fabricated against a number nobody has checked.

What’s included, and what isn’t?

Included: the architectural drawing set, all racking and display components, glass, lighting, hardware, the cooling unit sized for your configuration, and crated delivery. Not included: the wall or enclosure itself, electrical supply, and finish work by others. The drawing set states exactly which trades you need and what each is responsible for.

How long does it take?

It varies with the design — components are fabricated in parallel, and the longest one sets the schedule. Millwork runs eight to twelve weeks; metalwork two to four; frameless glass and mirrors about two; the cooling unit about two. Insulated glass doors are the long lead at twelve to sixteen weeks. Your drawing set states the schedule for your exact configuration before anything is fabricated.

What happens if the cooling fails?

Cooling is the one part that fails invisibly — you don’t find out until the wine does. Every edition is sized and specified by us rather than chosen from a list, and Prestige Care covers it from there. If a unit needs a technician the $500 service call is credited toward a replacement.

Is it really only ten?

Yes. Ten of each design, each numbered and recorded in the registry, and then the edition closes for good. The drawings aren’t reissued and the design isn’t rerun under another name.

Can I change the materials?

Yes — that’s Custom, available on any edition. Species, stain, metal finish, glass and stone are chosen with us rather than from a list, and layout or proportions can change too. Still numbered, still part of the edition, and priced above the authored finishes.