Limited Edition of 10
The Atelier
About 150 bottles in long rows across split stone.
Starting at
$11,250
Engineered before it is offered. Every edition ships with a full architectural drawing set.
Shown as rendered in the studio concept. Starting price reflects the base Signature configuration; the edition is drawn to your room on commission.
Capacity
150
Width
To your room
Height
Floor to ceiling
Depth
Alcove
The rods
Long rows across stone
Stainless rods run across the split-face stone in long rows, three bottles end to end, every label facing the glass. Light comes up from the floor and down from the cove, so the stone glows between the rows.
The ledge
One row, tilted back
At eye level in every bay, a sloped ledge stands a row of bottles cork-up. It breaks the long horizontals and puts tonight's choice where you can see it from the kitchen.
The view
From inside, looking out
Step through the French doors and turn around: steel and transom glass frame the kitchen and the room beyond. The wine room is small, but it is never closed off from the house.
The room
A gallery front off the kitchen
A three-bay black steel front, French doors, a run of transoms and a warm wood slat ceiling over stone. Bright outside, glowing inside, and drawn into the wall beside the kitchen bar.
FINISH
The Atelier
Four ways
Tap a finish to sweep it across the room. As shown is included; the alternates change the timber and metal and leave the design untouched. The edition is ten across every finish, so a finish no one else chooses can be yours alone.
As Shown
White Oak & Brass
Walnut & Black Steel
All Black
+
Custom
Selected finish
As designed
Glass
Light
Custom finish
Every material opens up — species, stain, metal, glass and stone chosen with us rather than from a list. Available on any edition, priced above the authored finishes. Still numbered.
Edition of Ten
Reserve your edition.
Three decisions: how deep it runs, which specification, and how you’d like it delivered. Cooling, structural load and engineering are ours — they’re never a question you have to answer.
The Atelier is shown at about 150 bottles. It is drawn to your room on commission rather than sold in sizes: the three-bay front, the transom line and the display ledges hold their proportion, and capacity follows the room. Counts are confirmed at specification.
Included in price
Have this configuration sent to you
We'll email the specification exactly as you've built it. No obligation, no drawings released.
Pricing shown is indicative. Final price is confirmed after field verification of your opening.
What Design Plans includes
Full architectural drawings dimensioned to your verified opening — plan, elevations, sections and details — plus structural load calculations, a complete material schedule listing every component, finish and quantity, and the cooling specification sized for your configuration. A licensed set, not a sketch.
Materials are not supplied at this level. Our racking, glass and cooling partners sell through authorised dealers only, so if you’d like us to supply and crate the components, choose Design + Materials.
Credited if you upgrade. The full plans fee is credited toward Design + Materials or Design + Build if you move up within twelve months.
Licensed for one build at one address. Not transferable and not for resale.
Provenance
Drawn, then built.
The Atelier is a concept from the Prestige studio: a black steel French-door wine room set into the wall off the kitchen. Behind a three-bay front with a full run of transom glass, about 150 bottles lie label-out in long stainless rod rows across warm-lit split-face stone, with an angled cork-up display ledge at eye level in every bay.
The doors open into a shallow alcove, so you step in rather than reach. It is drawn on commission, to your room, with the bays and the transom line set to your wall.
3
Bays of steel
A fixed bay racked behind the glass, French doors at the centre, a sidelight beside them.
1
Line of transoms
Unbroken across the head of every door and panel.
How It Works
Designed by us. Installed by yours (Or Us!).
Every edition ships as a complete, engineered kit — crated, numbered, and ready for your contractor.
01
Reserve your edition
Choose your size, specification and delivery. We assign your edition number and open the drawing, engineered to your verified opening.
02
Field verification
Your contractor then submits verified opening dimensions before anything goes into production.
03
Fabrication
Posts, racking, glass, lighting and hardware are fabricated to your verified measurements — in parallel, with the longest-lead component setting the schedule.
04
Crated delivery
Everything arrives palletized and labeled by install sequence, with a printed guide and video for each assembly.
05
Your contractor installs
Posts anchor floor to ceiling, the base sets like millwork, and the glass drops into the channel. We’re on call throughout.
Box & Papers
Owned by ten. Documented like it.
A fine watch is worth more with its box and papers. Your cellar arrives the same way.
The Ownership Card
Black anodised · No. 01 of 10
The ownership card.
Black anodized metal, laser-etched with the model, specification and edition number. It lives with the deed — not in a drawer.
The etched code opens your cellar’s private record: original drawings, material schedule, appraisal, and complete service history.
Scan → prestigecellars.com/registry/atelier-01
01 / 04
The portfolio
A linen-bound folio holding the certificate of authenticity, signed and dated to your edition number.
02 / 04
As-built drawings
Your full shop drawings and material schedule — every finish, fitting and post spec, as installed.
03 / 04
Appraisal letter
A written valuation for insurance today, and for the listing when the home eventually sells.
04 / 04
Brass plaque
Engraved “The Atelier · No. __ of 10,” set into the piece itself.
Technical Specifications
Held to a Standard.
Edition
Limited — 10 total
›
Capacity
about 150 bottles · as shown
›
Dimensions
Drawn to your room
›
The rods
Stainless · on split stone
›
The ledge
Cork-up · eye level
›
The doors
French · steel and transom
›
Glass
Black steel-framed · French doors, transoms
›
Lead time
Drawn on commission · then 8–12 weeks
›
Questions
Answered.
Who installs it?
Your own contractor. Every edition is engineered as a complete wine cellar kit — components arrive crated, numbered and drawn to your verified opening, with an installation set a competent carpenter can work from. No specialty glazier, no factory crew flown across the country. In Texas we install it ourselves if you’d rather.
Will it fit my space?
Almost certainly, and it won’t need to be a standard size.
The Atelier is drawn to your verified opening rather than to a catalogue dimension.
It scales across Drawn to your room · three-bay steel front with transoms, and the proportions hold at any size in that range.
What happens if a measurement is wrong?
The sequence is built to prevent it. The channel and framing ship first and are installed before anything is cut. Your contractor then returns signed, verified opening dimensions, and only then is the glass cut and the racking finalised. Nothing expensive is fabricated against a number nobody has checked.
What’s included, and what isn’t?
Included: the architectural drawing set, all racking and display components, glass, lighting, hardware, the cooling unit sized for your configuration, and crated delivery. Not included: the wall or enclosure itself, electrical supply, and finish work by others. The drawing set states exactly which trades you need and what each is responsible for.
How long does it take?
It varies with the design — components are fabricated in parallel, and the longest one sets the schedule. Millwork runs eight to twelve weeks; metalwork two to four; frameless glass and mirrors about two; the cooling unit about two. Insulated glass doors are the long lead at twelve to sixteen weeks. Your drawing set states the schedule for your exact configuration before anything is fabricated.
What happens if the cooling fails?
Cooling is the one part that fails invisibly — you don’t find out until the wine does. Every edition is sized and specified by us rather than chosen from a list, and Prestige Care covers it from there. If a unit needs a technician the $500 service call is credited toward a replacement.
Is it really only ten?
Yes. Ten of each design, each numbered and recorded in the registry, and then the edition closes for good. The drawings aren’t reissued and the design isn’t rerun under another name.
Can I change the materials?
Yes — that’s Custom, available on any edition. Species, stain, metal finish, glass and stone are chosen with us rather than from a list, and layout or proportions can change too. Still numbered, still part of the edition, and priced above the authored finishes.